String Wound Filters
String wound filter cartridge are structured loose outer layers and tight inner layers which can offer true depth filtration for high dirt holding capacity and extremely low media migration to ensure temperature and chemical compatibility. String wound cartridges are manufactured from durable 100 % polypropylene string that is wound tight to a rigid polypropylene core for best filtration. This filter is a piece and has hundreds of dimond shaped tunnel, which gradually becomes smaller than the outer diameter toward the core.
Products String Wound Filters
String Wound Cartridge Filters
The filament elements are a series of deep filters with a high particle absorption capacity and impurities, while the fluid must pass through a very small amount of media. These filters are produced continuously using the process of twisting the media around the core at high speed. The filter is in one piece and has hundreds of diamond-shaped tunnels that gradually shrink from the outer diameter to the core. As the fluid moves toward the center of the filter, the particles gradually fall into the trap. (Large particles in the outer parts and small particles in the inner parts) In this case, there is much more storage capacity than if the filter has a fixed surface with the same dimensions and size of the hole, and according to customer needs, it is possible to add There is a spunbond layer around the core to ensure the degree of filtration and increase the filtration accuracy.
applications
- Drinking water systems
- Chemical processes
- Medical
- Plating
- RO systems
Benefits and features
- High adsorption capacity of particles and impurities
- Variety of applied media for compatibility with chemical fluids
- Long service life and low pressure drop
- No taste and odor and use of hygienic grade of raw materials
- Use of suitable core as needed for application at temperatures and conditions Different chemicals
Characteristics of spun yarn filter
Long filter life
Long-term use
Excellent particle absorption
Excellent absorption without releasing carbon particles
Suitable lifespan
With different standards
Buy String Wound Filters
To buy a spun yarn filter, you need to be familiar with these filters. Because of the similarity in appearance and dimensions of these filters to fiber filters, you may confuse the two. Note that spin yarn purifiers are generally used for water purifiers that filter by filtration and are not very efficient in reverse osmosis water treatment. Other differences between these two types of filters include their accuracy. Spinning filters are usually less accurate than fiber filters, so using them in RO water treatment will not be very effective.
In different types
These filters are available in 4 types: simple cap, cartridge cap, closed cap and spring cap.
In various sizes
String Wound filters can be purchased in 10-inch, 20-inch, 30-inch, 30-inch, 40-inch, 50-inch and 60-inch sizes.
With different microns
It is possible to produce these filters from 0.5 to 100 microns on a custom route.
Slim String Wound Cartridge Filters
These filters are used in semi-industrial and industrial devices with the aim of removing suspended solids in the water, rust of pipes and sediments. This filter has a longer lifespan than similar fiber filters.
Jumbo String Wound Cartridge Filters
Jumbo spin yarn purifiers are great for water that has high levels of contaminants such as sand. Coarse particles in the water are trapped in the layers of this filter and are installed in semi-industrial water purifiers, industrial water purifiers and all kinds of pre-treatment and sediment traps and remove sand, mud, sludge, algae, soil, rust. Corrosion of pipes, sediments and physical particles of water.
